NL / ENLog in
Contents
  1. 0How it fits together
  2. 1Create the project
  3. 2Component Onboarding
  4. 3Indexing of Datapoint lists (for BMS)
  5. 4Data exploration
  6. 5Install the Link
  7. 6Network settings
  8. 7Wired connection to installation components
  9. 8On-site onboarding
  10. 9Optimize
  11. 10Use the platform
Reference
Chapter 6 · Network settings

Wired internet with Link installation network

Internet connection

The Link is connected to the internet through a wired connection available on site. Ethernet port ETH1 is used to attach the Link to the network that provides internet.

Local installation network

The Link functions as a router. Ethernet port ETH2 is used to add installation components to the network. The network can be expanded using network switches or wireless access points where necessary. See Using the Link installation network for more details.

Installation component IP settings

IP address (range)10.1.X.X
Subnet mask255.255.0.0

Link IP settings

The following fixed IP settings are used.

IP address10.1.0.1
Subnet mask255.255.0.0

Do not add another router to the Link network. This may cause network instability and devices may become inaccessible for the Link.

Previous4G internet with existing installation network NextWired internet with existing installation network