NL / ENLog in
Contents
  1. 0How it fits together
  2. 1Create the project
  3. 2Component Onboarding
  4. 3Indexing of Datapoint lists (for BMS)
  5. 4Data exploration
  6. 5Install the Link
  7. 6Network settings
  8. 7Wired connection to installation components
  9. 8On-site onboarding
  10. 9Optimize
  11. 10Use the platform
Reference
Chapter 10 · Use the platform

Demand Based Ventilation

If you have Demand Based Ventilation, the top of the page shows the ventilation status and the efficiency gain, with the € savings, the energy savings and the air quality score over the selected period.

KPI How it is calculated
Ventilation Efficiency Gain The reduction in energy use achieved through fan and heating element optimization. The value is calculated as the estimated savings relative to the estimated baseline consumption.
Total Estimated € Savings The estimated savings from fan and heating element optimization, based on an electricity price of 0.21 €/kWh.
Total Estimated Energy Savings The estimated savings from fan and heating element optimization.
Air Quality Score The percentage of working hours during which the CO₂ levels remain below 900 ppm. If the selected time range contains no working hours, the score is shown as n.a.

Under each figure, the trend of the last three months.

And what you have saved so far this year, with its equivalent in car kilometres.

Below it you see the ventilation energy savings, the ventilation air flow of Demand Based Ventilation against the original clock schedule, and the air quality of the building per room.

PreviousAir quality NextRadiator Valve Optimization