Indexing Modbus TCP datapoints

Configure the protocol address. Select the protocol Modbus TCP and enter the Slave ID (1 to 247), IP Address and Port Number of the BMS you are connecting to. The port number is 502 unless you change it. Then click Create Address.

If the installation has more than one Link, make sure the right one is selected under Link Hardware: the Link that is connected to the BMS you want to index.

Component Onboarding
Link Hardware
INT-ML-01-18
Step 1: Configure Protocol Address
Protocol
Modbus TCP
Modbus TCP Configuration
Slave ID
Enter Slave ID (1-247)
IP Address
192.168.1.100
Port Number
502
Create Address
BackSkip - no protocol address needed
Upload the datapoint list. After you have set up the address, upload the datapoint list of the BMS under Datasheet. You can also add diagrams; they are optional.

Make sure the first row of the CSV holds the column names. See Prepare the file.
Start the classification. Once you have uploaded the file, click Start Classification.